Xerox 90-8017-800 Datasheet download pdf (Page 19)

Installation

14 DocuMate 272 Scanner User’s Guide

Step 4: Connect the USB Cable

The Xerox DocuMate 272 scanner connects to any available USB

port. Check your computer’s manual for USB port locations.

1. Plug the USB cable into the USB port on the scanner and then

into a USB port on the computer. The ports are identified with

the USB symbols.

You can also connect the scanner to a USB port on the

computer’s keyboard if it has one, or to a USB hub. If you use a

USB hub, it must have its own power supply already plugged

into an electrical outlet.

If you are using Windows XP Service Pack 1, and have

plugged the USB cable into a USB 1.1 port, an information

bubble may open explaining that “A HI-SPEED USB device is

plugged into a non-HI-SPEED USB hub”. Plug the USB cable

into a USB 2.0 port (if available) or just disregard the message.

If you leave it plugged into the USB 1.1 port, your scanner may

scan a bit slower than the 33 pages per minute, and 66 images

per minute available with a USB 2.0 port.

NOTE: You can connect the scanner to your computer while the

computer is running.

NOTE: If you have not installed the scanner driver, unplug the

USB cable from the computer and install the software now.

When the driver installation is complete, a message tells you

when to connect the scanner.

USB

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 127 128

No comments

Xerox 90-8017-800 Datasheet Page 19