Xerox DC User Manual download pdf (Page 83)

Xerox Document Centre Reference Guide Page 4 - 31

4. Making Copies

Covers

This feature allows you to add covers using stock drawn from a

different tray than your copies. You can have 1-sided or 2-sided

front or back covers, with or without an image.

The Covers section provides the following options:

No Covers will not produce any covers.

Select Front only to create a front cover.

Select Back only to create a back cover.

Selecting Front and Back creates both front and back

covers for your job. This selection is required if you are

adding covers to booklets.

The Output Cover Images button allows you to select blank, 1-

sided, 2-sided, or 2-sided with the second side rotated.

The Cover Stock button allows you to select the tray in which you

have loaded the cover stock. The cover stock must be at least as large

as the stock for the body of the job.

If you create 1-sided covers with images, the machine uses the first

image and last image of your original set as the cover images.

Notes about 2-sided covers

If you have an odd number of originals and you want a blank page

on the back cover, you must add a blank page to your original set.

Otherwise, the last two images of your odd number of originals will

be printed on the back cover. A blank page will be inserted between

the back cover images and the body of the document.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 351 352

No comments

Xerox DC User Manual Page 83