Xerox DC User Manual download pdf (Page 328)

Page 15 - 10 Xerox Document Centre Reference Guide

Output

Quality

(cont’d)

There are streaks, lines,

spots, or black, solid, or

dotted lines

Clean the Document Glass, especially near

the black plastic ramp on the glass, if using

the Document Feeder.

Run the job from the Document Glass.

Check the quality of the original. Use

Border Erase or Edge Erase to remove

lines from the edges of the document.

Turn on Background Suppression.

Load fresh paper.

Image Loss

When copying a document from a larger

paper size to a smaller size, use Auto% to

reduce the image onto the smaller size.

Use reduction i.e., copy at 90% instead of

100%.

Select Auto Center and run the job again.

If scanning from the Document Glass,

select Manual Platen Input and define the

document size. Register the document in

the left rear corner and copy with the cover

down.

If using the Document Feeder, ensure the

document Size is correctly defined. Refer

to page 10 -28 for more information.

A message is displayed

that the machine cannot

sense the size of the

original on the glass

Select Original Size in the Image

Adjustment Tab and enter the size.

Rescan the original, leaving the cover

raised.

Problem Symptom Recommendation

1 2 ... 323 324 325 326 327 328 329 330 331 332 333 ... 351 352

Comments to this Manuals

No comments