Xerox DC User Manual download pdf (Page 284)

Page 12 - 32 Xerox Document Centre Reference Guide

Print Controller stores the print jobs in the Page Description

Language (PDL) that the workstation creates through your print

driver. These files are usually PostScript or PCL. As the files are

interpreted into bitmaps, the bitmaps are transferred to the marking

part of the device. This is similar to your scanned copy images

entering the digital copier through the document scanner. Once the

job has printed, the pointers to the PDL files are automatically

deleted. Subsequent jobs will overwrite the PDL files on the ESS

hard drive.

A note of caution: when using ‘Sample Set’, the first set is printed

and then the job is automatically held. The user should be careful to

either release or delete the job after receiving the ‘Sample Set’ to

prevent the job from being held in the queue. Similarly, for Secure

Print jobs, the job should be printed as soon as possible since it is

resident in the system until it is printed.

Image Residue on the Photoreceptor (Imaging) Belt

After printing and during cycle out, the photoreceptor belt passes by

both the cleaning station and erase lamp removing residual toner and

charge. After printing high security documents, the user can run a

copy of two blank sheets of paper to initiate the cleaning and erase

cycles again, reassuring no potential latent (electrostatic) image

remains on the photoreceptor.

If you have other questions, or need further clarification please call

your local Customer Support Center.

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 351 352

No comments

Xerox DC User Manual Page 284