Xerox DC User Manual download pdf (Page 44)

Page 3 - 6 Xerox Document Centre Reference Guide

The Machine Administrator will set up each tray to be Fully

Adjustable, Dedicated, or, on a DC model, Size Only.

If the tray is Fully Adjustable, anyone can change the stock size,

type and color through a pop-up screen that appears when the paper

tray is opened then closed. This screen provides the option to

confirm or to change the paper settings.

When a Dedicated paper tray is opened, a pop-up screen will appear

on the Touch Screen identifying the stock that should be loaded in

that tray; however, it will not allow you to reprogram the settings.

Only the Machine Administrator can change the stock attributes for

a Dedicated paper tray.

A Size Only paper tray allows anyone to adjust the size of the paper

stock that can be loaded in that tray. The system will not display the

type and color of the stock and will assume it to be the standard

default stock, which is typically plain white paper. This is available

only on a DC model.

The ST model requires certain sheet orientation for network print

jobs. A message on the screen will notify you when the orientation

is not correct to support network printing.

NOTE

To avoid undesired output results, ensure that the programmed

stock settings match the actual tray contents and all the stock in the

tray is identical.

Auto Tray Switching

Auto Tray Switching provides the ability to draw stock from another

tray when the initial tray becomes empty.

In order for this feature to work properly, the Machine

Administrator must enable the Auto Selection on the trays. Refer to

page 10-14 for information on enabling Auto Selection.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 351 352

No comments

Xerox DC User Manual Page 44