Xerox DC User Manual download pdf (Page 329)

Xerox Document Centre Reference Guide Page 15 - 11

15. Problem Solving

Output

Quality

(cont’d)

Jobs scan but do not print Some jobs require image processing before

printing. This may take as long as 2

seconds per page.

Check the Job Status to determine if a job is

processing. There may be a job in the queue

with a status of paused. Delete this job if it

remains in the state over 3 minutes.

This may possibly be a result of an

incorrect feature combination. Select

Software Reset.

Machine automatically

deletes the jobs

If accompanied by an out of memory

message, check the Job Queue and delete

unnecessary jobs.

Ensure that all paper jams have been

cleared and that there is no torn paper

inside a jam area.

If the machine is scanning and printing the

different jobs, wait until the current printing

job is completed.

If the machine is scanning and printing the

same job, use Build Job to delay printing.

Scanning complicated half-tones while

printing complicated half-tones requires

more memory than typical copy jobs.

If using the Document Feeder, check that

originals are flat and not folded.

Output does not reflect the

selections made on the

Touch Screen

Press Clear All between jobs.

Copy

Quality

Output is too light or too

dark

Check the quality of the original.

Select Lighten or Darken.

Select text, if the original is text.

Problem Symptom Recommendation

1 2 ... 324 325 326 327 328 329 330 331 332 333 334 ... 351 352

Comments to this Manuals

No comments

Xerox DC User Manual Page 329

Comments to this Manuals

Related products and manuals for Printers Xerox DC