Xerox DocuMate 272 User Manual download pdf (Page 30)

DocuMate 272 Scanner User’s Guide 25

Scanning

Check the Scan Settings Before Scanning

1. To check the scan settings before scanning, press, hold down,

and then release, either the Simplex or Duplex button.

The One Touch Properties window opens for you to view and

change the settings before scanning. This sample shows the

current description of setting 6.

The One Touch Button Panel also opens with the description of

the selected settings.

To Refresh the One Touch 4.0 settings, click the Refresh

button.

If you make changes in the One Touch Properties window, then

click the Apply button, the information in the One Touch panel

will update to show the new settings.

2. When you are ready to scan, press either the Simplex or

Duplex button, or click OK to close the window then click the

button on the One Touch Button Panel.

Press, hold down,

and then release

either button to

see the setting for

the selected LED

number.

Note: The configurations shown

on this example of the One

Touch Properties window are for

illustration purposes only. The

configurations you see on your

One Touch Properties window

may be different.

This number

corresponds to the

LED on the scanner.

The icon indicates the

Destination Application

for this setting.

The current name of the

setting.

Your document will be scanned with

these options for setting Number 6.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 126 127

No comments

Xerox DocuMate 272 User Manual Page 30