Xerox XE60 User Manual download pdf (Page 48)

Repacking the WorkCentre

Storage/Transportation

When you pack the WorkCentre away for storage or transportation, follow

the instructions given below to ensure that the WorkCentre will not get

damaged. Use the original box and packing materials.

1. Turn off the power switch and disconnect the power cord.

2. Open the front door.

Be careful not to let any toner spill out of the toner cartridge

during removal.

3. Remove the toner cartridge. (Refer to Replacing the Toner Cartridge.)

4. Close the front door.

5. Insert the shipping screw stored in the plastic insert in the right hand

side of the front door.

6. Push in the paper tray extension (if in use), remove any paper from the

tray and remove the tray.

7. Store the IEEE-1284 parallel cable and the power cord.

Service

It is important that you speak with a service representative to resolve any

persistent problem. The service representative will direct you as to what

action must be taken.

The WorkCentre cannot be shipped for service without the authorization of

a service representative.

Visit the Xerox Web site at: http://www.teamxrx.com

or call our experts at:1 – 800 – TEAM – XRX (1 – 800 – 832 – 6979)

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 57 58

No comments

Xerox XE60 User Manual Page 48