Xerox XE60 User Manual download pdf (Page 22)

3. Place the paper into the paper tray

with the side to be printed facing

toward you. Adjust the position of the

paper so that its right edge is up

against the right paper guide. Then

move the left paper guide until it is

resting gently against the left edge of

the paper. The paper tray can be

filled to the MAX line with standard

weight paper (16 to 24 lbs. or about

60 to 90 g/m

If copying onto an envelope:

Insert the side to be copied on is

facing upwards (as shown by the

imprint on the paper tray) and the flap

on the reverse side is closed and at

the right when looking from the front

of the printer. Leave a gap of

approximately

” (1 mm) between

the paper guide and the left edge of

the envelope.

When copying envelopes, labels

and transparencies, it is

recommended that you load and

copy one envelope or sheet at a

time.

4. Push the paper release lever back. The paper will be clamped by the

paper feed roller inside the printer.

The handle may position itself. Do not force the handle or

breakage could occur.

Paper jams may occur if:

− The paper tray is overstacked.

− If the space between the paper guide and the left edge of the

paper is greater than 1 mm, or if the paper guide is pushing the

paper so hard that the paper buckles.

− The paper is not stored properly and absorbs moisture from

the air (replace the paper).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 57 58

No comments

Xerox XE60 User Manual Page 22