Xerox XE60 User Manual download pdf (Page 39)

Installation for Windows 3.1x and Windows NT 4.0. 95 or

The Printer Driver Installation software cannot be installed using the Control

Panel/Printers for Win 3.1x or the Add Printer Wizard for Win

95/98/NT4.0. Please use one of the following methods depending on your

operating system.

1. Ensure that the computer and the

WorkCentre are turned off.

2. Plug the IEEE-1284 cable into the

parallel port on the WorkCentre.

3. Plug the other end of the IEEE-1284

cable into the computer.

4. Turn on the PC.

NOTE: Be sure to close all applications before installing the printer driver.

5. Start Windows on your computer.

6. Insert the WorkCentre XE CD-ROM into the CD-ROM Drive.

7. For Installation of 3.1x:

Choose File from the menu bar in Program

Manager, and then choose the Run… command.

For Installation for Windows NT 4.0, 95 or 98

: Click on the Start

button and then choose the Run menu option.

8. Type D:\SETUP (or the appropriate drive letter depending on your CD-

ROM Drive) in the command line box. Click on the OK button to

proceed.

9. Follow the on-screen instructions.

10. For Installation of Windows 3.1x:

When the install is complete,

ensure that the power cord is plugged into the WorkCentre and then

into a grounded outlet. Restart Windows and turn on the WorkCentre.

For Installation for NT 4.0, 95 or 98

: When the installation is

complete, ensure that the power cord is plugged into the WorkCentre

and then into a grounded outlet. You will be asked whether or not to

print a test page. If you wish to do so, load paper, turn on the

WorkCentre and then click the Yes button.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

No comments

Xerox XE60 User Manual Page 39