Xerox XE60 User Manual download pdf (Page 53)

5. Place the toner cartridge on the scrap paper prepared in step 2.

The fusing unit beneath the drum cartridge becomes very hot

when the WorkCentre is in use. Be careful not to touch the fusing

unit when removing the drum cartridge.

6. Hold the tabs on the drum cartridge handle

between your thumbs and index fingers,

and gently pull the drum cartridge up and

out in a circular motion to lift it clear of the

WorkCentre.

7. Remove the new drum cartridge from the

plastic bag and set it down on a clean,

uncluttered and level surface.

The new drum cartridge is sealed with a sheet of black protective

paper to shield the drum from light. To prevent damage to the

drum surface, do not remove the protective paper until you have

inserted the cartridge into the WorkCentre.

8. Place the used cartridge into the empty bag, seal the bag.

NOTE: Help the environment by recycling your used drum cartridge. Use

the recycle sticker packed with the drum cartridge for instructions on

returning the used drum cartridge to Xerox.

9. Hold the tabs on the new drum cartridge

handle between your thumbs and index

fingers. Slide the drum cartridge along the

runners into the WorkCentre.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58

No comments

Xerox XE60 User Manual Page 53