Xerox XE60 User Manual download pdf (Page 45)

Creating WorkCentre XE Floppy Disk Installation

Diskettes

If floppy diskettes are required to install the WorkCentre Printer Driver

Software, the user can order floppy diskettes or create a set of diskettes

from CD-ROM.

To create a set of WorkCentre XE Printer Driver floppy Diskettes, find a PC

that has a floppy diskette drive with a CD-ROM drive and follow the

procedure below. Four or five blank high density diskettes will be required.

Windows 3.1x:

1. Insert the WorkCentre CD-ROM into the CD-ROM Drive.

2. Choose File from the menu bar in Program Manager, and then

choose the Run… command.

3. Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letter

depending on your CD-ROM Drive) in the command line box. Click

on the OK button to proceed.

4. Follow the on-screen instructions.

Windows 95, Windows 98 and Windows NT 4.0:

1. Insert the WorkCentre CD into the CD-ROM Drive.

2. Click on the Start button and then choose the Run menu option.

3. Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letter

depending on your CD-ROM Drive) in the command line box. Click

on the OK button to proceed.

4. Follow the on-screen instructions.

To use the Floppy Disk Installation Disks created, follow the same

procedure for your operating system but refer to the floppy disk drive (A: B:)

rather than the CD-ROM drive (D:).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

No comments

Xerox XE60 User Manual Page 45