Xerox 5750 User Manual download pdf (Page 56)

44 Installing user software on a Windows computer

Completing the Windows NT 4.0 TCP/IP connection

Complete the setup for the TCP/IP and lpr connection as follows:

• Prepare the DocuColor to accept print jobs using TCP/IP and lpr protocols.

• Conﬁgure the workstation for the TCP/IP connection.

Before you continue, ask the system administrator for the IP address assigned to the

DocuColor, as well as the subnet mask and the gateway address, if they are used.

TO PREPARE THE DOCUCOLOR FOR TCP/IP AND

LPR PRINTING:

1. With the DocuColor turned off, connect it to the network.

2. Turn on the DocuColor and from the Control Panel, select PRINTER SETUP. Conﬁrm that

one of the queues is enabled.

3. Select NETWORK SETUP. Enable TCP/IP and enter the appropriate settings for

IP address, subnet mask and gateway address.

For details, see the Administrator Guide.

4. Exit NETWORK SETUP and save changes.

The DocuColor reboots.

The TCP/IP Protocol and Microsoft TCP/IP printing services must already be

installed on the Windows NT workstation.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 69 70

No comments

Xerox 5750 User Manual Page 56