Xerox 5750 User Manual download pdf (Page 50)

38 Installing user software on a Windows computer

8. Enter or verify the name of the printer in the Printer Name box in the Create Printer

dialog, and then click OK.

9. Click OK.

You have conﬁgured your workstation to use TCP/IP to communicate with the printer.

When you select Print, your PostScript ﬁles will be transmitted over the LPR Port

connection to the queue set up on the server by your administrator. To verify the

connection, print a test document from each networked computer that will use the

printer.

Setting up printing with Windows NT 4.0

Before you can set up PostScript printing for Windows NT 4.0, you need to install the

Windows NT PostScript printer driver. The following procedures describe how to

install the PostScript Printer Description ﬁle (PPD) for your printer and how to

conﬁgure printing for your network type. The printer ﬁles provided on the User

Software CD support the Intel version of Windows NT.

There is more than one possible sequence of steps in installing the same printer. To

avoid presenting an excessively branching procedure, we suggest that you install the

DocuColor as a local parallel port printer ﬁrst, and add the network port connection

after the driver installation. If you prefer, you can install the network port ﬁrst and the

driver later.

Adding a printer to a local system requires that you log in to your local Windows NT

workstation (not the network server domain) and that you are a member of the

Administrators group for your workstation.

If your Windows NT computer is a client on a network, and you want to print to a

shared printer, ﬁnd out the name of the server on which the printer is deﬁned.

TO SET UP POSTSCRIPT PRINTING WITH WINDOWS NT 4.0:

1. Insert the User Software CD into your computer.

2. Click Start in the Windows NT taskbar, choose Settings, and then choose Printers.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 69 70

No comments

Xerox 5750 User Manual Page 50