Xerox WorkCentre 3045 User's Guide Page 161

  • Download
  • Add to my manuals
  • Print
  • Page
    / 206
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 160
Troubleshooting
WorkCentre 3045 Multifunction Printer 161
User Guide
Probable Causes Solutions
The printer is connected to a power strip
shared with other high-power devices.
Plug the printer directly into the outlet or into a power strip that is
not shared with other high-power devices.
The Printer Does Not Print
Probable Causes Solutions
The printer is in Energy Saver mode. Push the control panel button.
PrintingScout displays an error message. Follow the instructions in the PrintingScout message to correct the
problem. If the error persists, contact your Xerox representative.
The printer is out of paper. Load paper into the tray.
A toner cartridge is empty. Replace the empty toner cartridge.
The Error Indicator is blinking. Turn off the printer, then turn it on again. If the error persists,
contact your Xerox representative.
No control panel indicators are lit. Turn off the printer, confirm that the power cord is plugged in
correctly to the printer and the outlet, then turn on the printer. If
the error persists, contact your Xerox representative.
The printer is busy. If the Status Indicator is flashing green, it is normal. A previous
print job could be the problem. Use PrintingScout to delete all
print jobs in the print queue.
Load the paper in the tray.
If the Status Indicator is not flashing after you send a print job,
check the USB connection between the printer and the
computer. If the USB cable is properly connected, turn off the
printer, then turn it on again.
The printer cable is disconnected. If the Status Indicator is not flashing after you send a print job,
check the USB connection between the printer and the
computer.
For the WorkCentre 3045NI Multifunction Printer: If the Status
Indicator is green, but not flashing, after you send a print job,
check the Ethernet connection between the printer and the
computer.
Printer is Making Unusual Noises
Probable Causes Solutions
There is an obstruction or debris inside the
printer.
Turn off the printer and remove the obstruction or debris. If you
cannot remove it, contact your Xerox representative.
Page view 160
1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 205 206

Comments to this Manuals

No comments