Xerox WorkCentre 5230V ATE User's Guide download pdf (Page 60)

3 Copy

Parallel Edges

Allows you to specify the edge erase amounts for top and bottom and/or left and right

edges. Up to 50 mm (2 inches) can be erased from each edge.

Image Shift

This feature allows you to change the position of the image on the output copy paper.

NOTE: Make sure that the orientation of the documents and the [Original Orientation]

setting on the [Layout Adjustment] screen are the same.

NOTE: The amount of the image shift depends on the size of paper loaded in the

machine.

NOTE: When [Mixed Sized Originals] is selected, the amount shifted is determined by

the image position of the first sheet, and is applied to all subsequent sheets of the

documents.

Select [Image Shift] on the

[Layout Adjustment] screen.

Select the required option.

Select [Save].

No Shift

Disables the feature.

Auto Center

Automatically places the image in the center of the copy paper.

Margin Shift

Moves the image by specified amounts on the copy paper in the Up/Down and Left/

Right directions. You can enter up to 50 mm (2 inches) for both dimensions.

If your machine is configured to make double-sided copies, you can select the options

below for both Side 1 and Side 2.

• Side 1 - Allows you to move the image on Side 1. You can specify an offset of up to

50 mm (2 inches) for both dimensions using the scroll buttons.

• Side 2 - Allows you to move the image on Side 2. You can specify an offset of up to

50 mm (2 inches) for both dimensions using the scroll buttons.

• Mirror Side 1 - Automatically shifts the image on Side 2 to mirror Side 1.

Image Rotation

This feature allows you to automatically rotate the image to match the orientation of the

paper in the tray.

Select [Image Rotation] on the

[Layout Adjustment] screen.

Select the required option.

Select [Save].

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 181 182

No comments

Xerox WorkCentre 5230V ATE User's Guide Page 60