Xerox 7600i User's Guide download pdf (Page 96)

Xerox 7600i

User’s Guide

To configure a destination application for the Send to Application link:

1. Click Browse to open the Windows file browser and navigate to the location of the application’s executable

(*.exe) file.

In most cases, the application’s directory is located in the programs directory on the C:\ drive. Because you can

select any executable file, make sure you select an application that can receive image or text files.

2. Select the application’s *.exe file then click on Open.

The application’s *.exe file path will now show in the Application path field.

3. Click on OK to close the window.

For basic scanning, you do not need to adjust any of the other settings in this window. The default settings will

work with most applications. The advanced settings are described below.

4. Select a file format and scan configuration in the One Touch Properties window.

If you select a text file format, the scanned image is converted into editable text before being sent to your

selected application.

5. Click on OK to close One Touch.

6. Put the document(s) in the scanner and start scanning with the button you set to use the Send to Application

destination.

7. The scanner starts scanning and, when finished, sends the scanned file to the application you selected.

Technical note

• After configuring this link, you may need to click Refresh in the One Touch Properties window to show the

correct application icon in the Select destination list.

Send to Application One Touch

Link Properties window

Send to Application Scan

Configuration Properties window

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 181 182

No comments

Xerox 7600i User's Guide Page 96