Xerox 90-8015-200 Datasheet download pdf (Page 15)

Installation

10 DocuMate 262 Scanner User’s Guide

Step 4: Connect the USB Cable

The DocuMate 262 scanner connects to any available USB port.

Check your computer’s manual for USB port locations.

1. Plug the USB cable into the USB port on the scanner and then

into a USB port on the computer. The ports are identified with

the USB symbols.

You can also connect the scanner to a USB port on the

computer’s keyboard if it has one, or to a USB hub. If you use a

USB hub, it must have its own power supply already plugged

into an electrical outlet.

If you are using Windows XP and have plugged the USB cable

into a USB 1.1 port, an information bubble may open explaining

that “A HI-SPEED USB device is plugged into a non-HI-SPEED

USB hub”. Plug the USB cable into a USB 2.0 port (if available)

or just disregard the message. If you leave it plugged into the

USB 1.1 port, your scanner may scan a bit slower than the 33

pages per minute, and 66 images per minute available with a

USB 2.0 port.

NOTE: You can connect the scanner to your computer while the

computer is running. You do not have to shut down your

computer.

NOTE: If you have not installed the software, unplug the USB

cable from the computer and install the software now. When the

software installation is complete, a message tells you to connect

the scanner.

USB

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 114 115

No comments

Xerox 90-8015-200 Datasheet Page 15