Xerox 4090 User Manual Page 100

  • Download
  • Add to my manuals
  • Print
  • Page
    / 168
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 99
PRINTER MAINTENANCE
not been formatted, you must format the diskette. Refer to
the “Formatting a diskette” section later in this chapter.
For more information about loading 1/4-inch cartridge tapes,
9-track magnetic tapes and cartridge tapes, refer to the
“Setting up print job sources” chapter.
3. Enter the COPY command. Use the appropriate substep
described below, depending on the source and target media.
a. To copy files from an unlabeled tape to the system disk,
enter the following command:
COPY TAPE|CAR [EBCDIC
|ASCII] [disk-id] file-id
TAPE|CAR
Specifies the tape drive where the file is located. Use
TAPE if the file is on an open-reel tape, or CAR if the
tape is on a cartridge tape. Use the SUB DEVICE
command to identify the cartridge tape drive assigned
to the CAR keyword, if there is more than one
cartridge tape drive on your system (refer to the Xerox
4050/4090/4450/4650 LPS Command Reference).
[EBCDIC
|ASCII]
Identifies the format of the source tape.
[disk-id]
Identifies the system disk to which the file is written
(DP1:, DP1:, DP2:, or DP3:). You do not need to
enter this parameter.
file-id
Specifies the full name of the file to copy (including its
extension).
b. To copy files from the system disk to an unlabeled tape,
enter the following command:
COPY TAPE|CAR WRITE [EBCDIC
|ASCII] [disk-id] file-
id
TAPE|CAR
Specifies the tape drive to which you want to write the
file. Use TAPE if the file is on a 9-track tape, or CAR if
the file is on a 18-track cartridge tape. Use the SUB
DEVICE command to identify the cartridge tape drive
assigned to the CAR keyword if there is more than one
cartridge tape drive on your system. (Refer to the
Xerox 4050/4090/4450/4650 LPS Command Reference.)
[EBCDIC
|ASCII]
Identifies the format of the tape to be written.
[disk-id]
Identifies the system disk containing the file (DP0:,
DP1:, DP2:, or DP3:). You do not need to enter this
parameter.
file-id
Specifies the full name of the file to copy (including its
extension).
6-12 XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE
Page view 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 167 168

Comments to this Manuals

No comments