Xerox Phaser 6022 User Manual download pdf (Page 104)

Troubleshooting

104 Xerox

Phaser

6022 Printer

User Guide

Avoid the following:

• Polyester coated paper that is specially designed for inkjet printers.

• Paper that is folded, wrinkled, or excessively curled.

• Loading more than one type, size, or weight of paper in a tray at the same time.

• Overfilling the trays.

• Allowing the output tray to overfill.

For a detailed list of supported paper, go to www.xerox.com/paper.

Locating Paper Jams

WARNING: Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If

a sheet of paper is wrapped around the heat roller, do not try to remove it immediately. Switch off

the printer immediately and wait 20 minutes for the fuser to cool. Try to remove the jam after the

printer has cooled. If the error persists, contact your Xerox representative.

CAUTION: Do not attempt to clear any paper jams using tools or instruments. This can permanently

damage the printer.

The following illustration shows where paper jams can occur along the paper path:

1. Output Tray

2. Transfer Belt

3. Release Levers

4. Rear Cover

5. Main Paper Tray with Jam Access Cover

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 137 138

No comments

Xerox Phaser 6022 User Manual Page 104