Xerox Phaser 3330 User Manual download pdf (Page 95)

SolutionsSymptom

• Verify that the paper is the correct size, type, and weight

for the printer and that it is loaded properly. If not, change

the paper.

• Try a new ream of paper.

• Change the Paper Type settings in the print driver.

• In the Printing Preferences of the print driver, on the Pa-

per/Output tab, change the Paper Type setting.

The output print is wrinkled or

stained.

• Verify that envelopes are loaded properly in the bypass

tray.

• Follow the guidelines for printing on envelopes. For details,

refer to Guidelines for Printing Envelopes.

Envelopes are wrinkled or

creased when printed.

• Verify that the paper is loaded properly.

• Verify that the margins are set correctly in the application

you are using.

The top margin is incorrect.

1. Print a solid image over the entire surface of one sheet

of paper.

2. Load the printed sheet into the tray with the printed side

face down.

3. Print five blank pages to remove debris from the fuser

rollers.

The printed surface of the paper

is bumpy.

7-27Xerox

Phaser

3330 Printer

User Guide

Troubleshooting

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 113 114

No comments

Xerox Phaser 3330 User Manual Page 95