Xerox Phaser 3330 User Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 114
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
Wireless Network
If your network includes a wireless router or wireless access point, you can connect the
printer to the network with a wireless connection. A wireless network connection provides
the same access and services as a wired connection provides. A wireless network
connection is typically faster than USB and allows direct access to the printer settings
when using Xerox
®
CentreWare
®
Internet Services.
USB
If you connect the printer to one computer and do not have a network, use a USB
connection. A USB connection offers fast data speeds, but typically not as fast as an
Ethernet connection. In addition, a USB connection does not provide access to Xerox
®
CentreWare
®
Internet Services.
Connecting the Printer to the Network
Use a Category 5 or higher Ethernet cable to connect the printer to the network. An
Ethernet network is used for one or more computers and supports many printers and
systems simultaneously. An Ethernet connection provides direct access to printer settings
using Xerox
®
CentreWare
®
Internet Services.
To connect the printer:
1. Connect the power cord to the printer, and plug the cord into an electrical outlet.
2. Connect one end of a Category 5 or higher Ethernet cable to the Ethernet port on
the printer. Connect the other end of the Ethernet cable to a correctly configured
network port on a hub or router.
3. Turn on the printer.
For details on configuring network settings, refer to the System Administrator Guide
at www.xerox.com/office/3330docs.
Connecting to a Computer Using USB
To connect using USB, you need Windows 7, Windows 8 or later, Windows Server 2008
or later, or Macintosh OS X version 10.9 or later.
To connect the printer to the computer using a USB cable:
1. Connect the B end of a standard A/B USB 2.0 cable to the USB Port on the left side
of the printer.
2. Connect the A end of the USB cable to the USB port on the computer.
3. If the Windows Found New Hardware Wizard appears, select Cancel.
4. Install the print drivers. For details, refer to Installing the Software.
Turning On/Off the Printer
Before turning on the printer, ensure that the power cord is plugged into the printer and
wall outlet, and that the the power switch is in the off position.
3-3Xerox
®
Phaser
®
3330 Printer
User Guide
Installation and Setup
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 113 114

Comments to this Manuals

No comments