Xerox 4635 User Manual download pdf (Page 221)

13. System verification error

messages

These messages appear on the system controller display if

problems are detected during the verification self-tests that the

system runs at start-up after the Date and Time display is entered

or disabled. These messages are not displayed with letter or

number codes. In this chapter, they are listed alphabetically by

first word.

The appearance of any of these messages indicates the system is

not fully functional. It may be possible to operate the system in

a degraded mode, but its usage is questionable. The

recommended action for all of the following messages is to

contact your systems specialist or Xerox Customer Service.

Devices not accessible name, name...

One of the required system devices appears not to be in the

system and is not functioning. The following abbreviations are

used for the device names:

CD = Character Dispatcher

DISK = System disk

E-NET = Ethernet Network

GHO = Graphics Handling Option

HOST = online channel interface

IG = Image Generator

OEMI = OEM Interface

TAPE = Tape unit

X ENG = Xerographic Engine

XWP = Word processing communications interface

FCG exiting: invalid profile encountered.

The system has not loaded or cannot accept the parameters or

values you have entered. The cause may be incorrect syntax, too

many characters, etc. This message usually follows other system

messages which explain why the operation has failed.

Action 1. Verify that your values and/or syntax are correct and retry the

command.

2. If the message reappears, contact your supervisor or systems

support specialist.

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 13-1

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 338 339

No comments

Xerox 4635 User Manual Page 221