Xerox 4635 User Manual download pdf (Page 205)

10. PSC (printer subsystem

controller command) messages

The PSC command enables the selectable download of a printer

controller and RIP software. (Refer to your 4635 LPS Operations

Reference chapter on managing LPS resources for additional

information on the PSC command.)

PS1060 Initializing printer.

The printer is being processed and set at its starting values.

Action None.

PS1061 Initializing CSI.

The printer controller software (CSI board) is being downloaded.

Action None.

PS1062 Initializing RIP n.

The RIP board requested is being processed.

...Downloading Software Version xxxx

The RIP software version listed is being downloaded. If the

download is successful, no more messages are displayed. A

download error, however, causes one or more of the following

messages to appear:

....Device not configured in system

The RIP board specified for downloading has not been

configured into the system during the latest sysgen.

Action Reenter the command line without specifying the RIP board.

If authorized to do so, perform a mini-sysgen and configure the

desired RIP board into the system.

Contact your systems specialist or Xerox Customer Service.

....Device not installed in system

A RIP board not physically installed in the system has been

specified for downloading.

Note: It is possible for a RIP board to be configured into the

system but not actually installed.

Action Reenter the command line without specifying the RIP board.

Contact your systems specialist or Xerox representative about

having the specified RIP board physically installed into the

system.

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE 10-1

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 338 339

No comments

Xerox 4635 User Manual Page 205