Xerox 4110 User Manual download pdf (Page 11)

Xerox 4590 EPS/4110 EPS System Administration Guide 1-7

1. Overview

System Administrator Mode

As system administrator, you will need to perform administrative

tasks on the machine such as configuring the system and

changing system settings. To do so you must first enter the

System Administration mode.

To log in as System Administrator and display the System

Administrator Menu screen:

1. Press the Log In/Out button on the Control Panel.

2. Using the numeric keypad, enter the System Administrator

UserID and password. (You may also select Keyboard to

display a keypad screen and enter the user ID and password.)

NOTE: The default User ID value is 11111.

KEY POINT: It is recommended that you change the System

Administrator UserID and password immediately after installing

the machine. For information about the setting, refer to “System

Administrator settings” in this chapter.

3. Select Confirm.

4. To exit the System Administration mode, select Close

repeatedly until the Network Settings screen is displayed and

select Exit.

button

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 91 92

No comments

Xerox 4110 User Manual Page 11