Xerox DocuColor 250 User Manual download pdf (Page 18)

Page 18

TO PRINT IN SEMI-MANUAL MODE

1 Choose Print in your application.

2 Set the print options as follows:

•Manual Duplex = Manual

•Face-Down Printing = Face Up

•Paper Source = Tray 5 (Bypass) or Tray 6 (Oversized)

3 Print the job.

The even-numbered pages are printed.

4 If you are printing from Tray 5 (Bypass), remove any unused paper from the tray.

5 Notice how the pages are oriented in the output tray before removing them.

6Turn the pages over so that the printed side faces down and load them back in the same tray

used to print the ﬁrst side.

Depending on how you load the pages, you can print Side 2 with the same orientation as

Side 1 (Top-Top) or rotated 180 degrees relative to Side 1 (Top-Bottom).

For Top-Top printing, keep the pages oriented the same way as they were in the output tray,

except face down. For example, if the pages are upside down and face up, load them upside

down and face down.

Top-Top Top-Bottom

Portrait

Landscape

1 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

No comments

Xerox DocuColor 250 User Manual Page 18