Xerox WorkCentre C2424-5984 User Manual download pdf (Page 5)

Connections and Internet Protocol (TCP/IP)

WorkCentre® C2424 Copier-Printer

6-5

Configuring the Network Address

TCP/IP and IP Addresses

If your computer is on a large network, contact your network administrator for the appropriate

TCP/IP addresses and additional configuration information.

If you are creating your own small Local Area Network or connecting the system directly to

your computer using Ethernet, follow the procedure for automatically setting the system’s

Internet Protocol (IP) address.

PCs and systems primarily use TCP/IP protocols to communicate over an Ethernet network.

With TCP/IP protocols, each system and computer must have a unique IP address. It is

important that the addresses are similar, but not the same; only the last digit needs to be

different. For example, your system can have the address 192.168.1.2 while your computer has

the address 192.168.1.3. Another device can have the address 192.168.1.4.

Generally, Macintosh computers use the EtherTalk protocol to talk to a networked system.

Unlike TCP/IP, EtherTalk does not require systems or computers to have IP addresses.

Many networks have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server

automatically programs an IP address into every PC and system on the network that is

configured to use DHCP. A DHCP server is built into most cable and DSL routers. If you use a

cable or DSL router, see your router’s documentation for information on IP addressing.

For more information, go to the table of infoSMART Knowledge Base documents

at the end of

this section.

Automatically Setting the System’s IP Address

If the system is connected to a small established TCP/IP network without a DHCP server, use

the Installer on the WorkCentre C2424 Software CD-ROM to detect or assign an IP address to

the system. For further instructions, insert the software CD-ROM into your computer’s CD-

ROM drive. After the Installer launches, follow the prompts for installation.

Note

For the automatic Installer to function, the system must be connected to an established

TCP/IP network.

1 2 3 4 5 6 7 8 9 10 ... 42 43

No comments

Xerox WorkCentre C2424-5984 User Manual Page 5