Xerox 650/1300 Installation Guide download pdf (Page 55)

Installation and configuration for XDS Plus

Installation Guide 5-15

file:///<home directory>/Xerox_Applications/

XDS_Plus_Tool_Suite<version>/XDS Plus

NOTE: If asked, “Do you want to run the selected

application in a Shell Tool or without one?” Select “No

Shell Tool.”

An Action: Run window opens.

2. On the Action: Run window, select [OK]. A Run window

opens.

NOTE: If a printer registration file has been created for a

previous version, it will be referred to as your default

printer registration file. You will be asked if you want to

open this file.

3. Wait for the XDS Printer Registration window to open.

This may take several seconds.

4. On the XDS Printer Registration window, select [Open].

5. On the Open window, select the path for the printer

registration.

6. Select a printer discovery file such as printer.disc. It

should now be visible in the [File name] box. Select

[Open].

7. On the XDS Printer Registration window, the [Registered

Printers] list box displays the host addresses of any

printers that have already been entered in this file.

Adding printers to the Registered Printers list using the Printer

Registration Tool

To print documents using XDS Plus, you must use the XDS

Printer Registration tool to enter the IPP address of your

connected printer to the list of registered printers.

NOTE: XDS Plus supports many printer types, including LPR

printer models. ASCII attributes are sent to these LPR

printers and can be set up using the Printer Registration Tool.

Example:

http://server.xerox.com:631/servlet/IPPServlet.IppPrinter/

default

Perform the following to add the IPP addresses of your

connected printers to the printer discovery file.

1. Open the printer discovery file. Refer to “Accessing the

printer discovery file,” in this document, for the procedure.

1 2 ... 50 51 52 53 54 55 56 57 58

No comments

Xerox 650/1300 Installation Guide Page 55