Xerox 2060 User Manual download pdf (Page 36)

Printer components and options

3-2 System Overview Guide

7. Transport module

8. Tray 3

9. Tray 2

10.Tray 1

11.Upper door

Input tray capacity Tray capacity for the input trays is:

• Trays 1 and 2 hold 550 sheets of 24-pound or 90 gsm bond

paper.

• Tray 3 holds 2200 sheets of 24-pound or 90 gsm bond paper.

NOTE: For special stock, use tray 3.

All three input trays have buttons to specify weight. In addition,

tray 3 has selections for paper size (Non Standard or Standard),

and the paper type (Coated or Uncoated). You must use these

specifications for the printer to print properly. For the procedure

on loading paper and specifying the weight, paper size and

paper type, refer to the

Guide to Performing Routing

Maintenance

, “Paper trays” chapter.

NOTE: Although the tray input buttons for the DocuColor 2060

require you to specify weight, you also specify media weight

when using the Set Tray command at the printer controller. The

buttons on the tray require you to specify weight in gsm, whereas

the Set Tray command allows you to use any unit of

measurement for weight. Therefore, the number you specify on

the tray, and the number you specify using Set Tray may be

different numbers, while still referring to the same actual weight.

Additionally, Set Tray allows you to specify 0 to indicate no

preference.

Output tray

capacity

The offset catch tray holds 500 sheets of 24-pound or 90 gsm

bond paper.

If you have the optional high-capacity stacker (HCS) or high-

capacity stacker stapler (HCSS), the built-in top tray in these

devices replaces the standard offset catch tray. Refer to the

“Printer options” section for information on these optional

stackers.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 89 90

No comments

Xerox 2060 User Manual Page 36