Xerox WorkCentre 7525/7530/7535/7545/7556 with built-in controller Installation Guide download pdf (Page 12)

Installation

Xerox® Smart Card

Installation Guide

Software Enablement

Prior to installing the Xerox Smart Card solution, the software requires enabling on your Xerox device

using the Internet Services. The Feature Enable Key is printed on the inside cover of the Enablement

guide provided within the Xerox Smart Card kit.

Follow the instructions below to enable the device software.

Note: Some of the steps shown may require the System Administration password for your device

to be entered.

1. Access Internet Services

a. Open the web browser from your Workstation.

b. In the URL field, enter http://

followed by the IP Address of the

device. For example: If the IP

Address is 192.168.100.100,

enter the following into the URL

field: http://192.168.100.100.

c. Press Enter to view the Home page.

2. Access Properties

a. Select the Properties tab.

b. If prompted, enter the

Administrator User ID and

Password. The default is admin

and 1111.

c. Select the Login button.

3. Enable the Smart Card software

a. Select the Security link.

b. Select the Authentication link.

c. Select Setup in the directory tree.

d. In the Authentication &

Authorization Setup area, select

Edit Methods....

e. Set the Device User Interface

Authentication option to Smart

Card (CAC)/Personal Identity

Verification (PIV) using the

drop-down menu. If you require

the device to use the E-mail

address registered to the

authenticated user, select

Personalization.

f. Select Save.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

No comments

Xerox WorkCentre 7525/7530/7535/7545/7556 with built-in controller Installation Guide Page 12