Xerox DocuPrint NC60 User Manual download pdf (Page 11)

Control Panel Features

Chapter 1: Configuring the Printer

❖

1-5

The Keys

The Control Panel keypad consists of eight keys,

identified with international symbols and/or labeled in

English. The keys are also numbered 0 - 7. (Control Panel

overlays are available in some languages and are supplied

with the printer where applicable.)

Table 1.2 describes the function of each key.

Table 1.2 Control Panel keys and their functions

Key Description

Online

• If the Printer is On-line and not in the Menu system, pressing this key causes a

transition to Off-line. All pages currently in the paper path are printed and then

printing pauses until the printer is placed On-line. Status information via SNMP is

provided while in the Off-line state. Data are still accepted over all network

interfaces, and page formatting continues as long as memory is available. The

exception is the Parallel port running in the Compatibility mode, or the Serial port.

In Parallel, Off-line forces the “Select” line false and forces the “Fault” line true. In

Serial, Off-line sends an XOFF if this handshaking mode is selected, and forces the

DTR line false.

• If the printer is On-line and in the Menu system, pressing this key exits the menu

system. The printer remains On-line.

• If the printer is Off-line and not in the Menu system, pressing this key causes the

printer to change to the On-line state, provided no operator intervention condition

exists. This key is ignored if an operator intervention condition exists.

• If the printer is Off-line and in the Menu system, pressing this key exits the Menu

system. The printer state changes to On-line, provided no operator intervention

condition exists.

• If in the Password menu, and the display indicates “Enter Password”, pressing this

key causes a password digit “0” to be entered.

Table 1.2 Page 1 of 5

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 185 186

No comments

Xerox DocuPrint NC60 User Manual Page 11