Xerox Office Finisher LX User Manual download pdf (Page 10)

Loading Booklet Maker Staples

1-8

Office Finisher LX - User Guide

Loading Booklet Maker

Staples

If the optional Booklet Maker is installed, a

message appears on the touch screen when the

unit runs out of staples. When the message is

displayed, load a new staple cartridge into the

Booklet Maker. The Booklet Maker contains two

staple cartridges.

Make sure that the machine has stopped, and

open the side cover of the finisher.

Hold the tabs on both sides of the booklet staple

cartridge and pull the cartridge out of the Booklet

Maker.

Hold the tabs on both sides of the new booklet

staple cartridge, and insert it into the original

position until it clicks.

NOTE: If you have trouble inserting the cartridge,

make sure that the staples in the cartridge are

properly in place.

Move the Booklet Maker Staple Cartridges so that

both Staple Cartridges are easily accessible.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Xerox Office Finisher LX User Manual Page 10